While compilers should be conservative when targeting WebAssembly Core
features, runtimes should be lenient as otherwise people need to
constantly turn on all features. Currently, most examples have to turn
on 2.0 features because compilers such as AssemblyScript and TinyGo use
them by default. This matches the policy with the reality, and should
make first time use easier.
This top-levels an internal type as `api.CoreFeatures` and defaults to
2.0 as opposed to 1.0, our previous default. This is less cluttered than
the excess of `WithXXX` methods we had prior to implementing all
planned WebAssembly Core Specification 1.0 features.
Finally, this backfills rationale as flat config types were a distinct
decision even if feature set selection muddied the topic.
Signed-off-by: Adrian Cole <adrian@tetrate.io>
This refactors host functions with no-op or constant returns to be
implemented with wasm instead of the host function bridge. This allows
better performance.
This also breaks up and makes WASI tests consistent, in a way that shows
parameter name drifts easier.
Signed-off-by: Adrian Cole <adrian@tetrate.io>
This completes the implementation of SIMD proposal for both
the interpreter and compiler(amd64).
This also fixes#210 by adding the complete documentation
over all the wazeroir operations.
Signed-off-by: Takeshi Yoneda <takeshi@tetrate.io>
Co-authored-by: Crypt Keeper <64215+codefromthecrypt@users.noreply.github.com>
This implements various SIMD instructions related to
load, store, and lane manipulations for all engines.
Notablely, now our engines pass the following specification tests:
* simd_address.wast
* simd_const.wast
* simd_align.wast
* simd_laod16_lane.wast
* simd_laod32_lane.wast
* simd_laod64_lane.wast
* simd_laod8_lane.wast
* simd_lane.wast
* simd_load_extend.wast
* simd_load_splat.wast
* simd_load_zero.wast
* simd_store.wast
* simd_store16_lane.wast
* simd_store32_lane.wast
* simd_store64_lane.wast
* simd_store8_lane.wast
part of #484
Signed-off-by: Takeshi Yoneda <takeshi@tetrate.io>
Co-authored-by: Adrian Cole <adrian@tetrate.io>
This commit enables WebAssembly 2.0 Core Specification tests.
In order to pass the tests, this fixes several places mostly on the
validation logic.
Note that SIMD instructions are not implemented yet.
part of #484
Signed-off-by: Takeshi Yoneda <takeshi@tetrate.io>
Co-authored-by: Crypt Keeper <64215+codefromthecrypt@users.noreply.github.com>
This commit adds support for multiple tables per module.
Notably, if the WithFeatureReferenceTypes is enabled,
call_indirect, table.init and table.copy instructions
can reference non-zero indexed tables.
part of #484
Signed-off-by: Takeshi Yoneda <takeshi@tetrate.io>
This commit implements the rest of the unimplemented instructions in the
bulk-memory-operations proposal.
Notably, this adds support for table.init, table.copy and elem.drop
instructions toggled by FeatureBulkMemoryOperations.
Given that, now wazero has the complete support for the bulk-memory-operations
proposal as described in https://github.com/WebAssembly/spec/blob/main/proposals/bulk-memory-operations/Overview.mdfixes#321
Signed-off-by: Takeshi Yoneda <takeshi@tetrate.io>
During #425, @neilalexander gave constructive feedback that the API is
both moving fast, and not good enough yet. This attempts to reduce the
incidental complexity at the cost of a little conflation.
### odd presence of `wasm` and `wasi` packages -> `api` package
We had public API packages in wasm and wasi, which helped us avoid
leaking too many internals as public. That these had names that look
like there should be implementations in them cause unnecessary
confusion. This squashes both into one package "api" which has no
package collission with anything.
We've long struggled with the poorly specified and non-uniformly
implemented WASI specification. Trying to bring visibility to its
constraints knowing they are routinely invalid taints our API for no
good reason. This removes all `WASI` commands for a default to invoke
the function `_start` if it exists. In doing so, there's only one path
to start a module.
Moreover, this puts all wasi code in a top-level package "wasi" as it
isn't re-imported by any internal types.
### Reuse of Module for pre and post instantiation to `Binary` -> `Module`
Module is defined by WebAssembly in many phases, from decoded to
instantiated. However, using the same noun in multiple packages is very
confusing. We at one point tried a name "DecodedModule" or
"InstantiatedModule", but this is a fools errand. By deviating slightly
from the spec we can make it unambiguous what a module is.
This make a result of compilation a `Binary`, retaining `Module` for an
instantiated one. In doing so, there's no longer any name conflicts
whatsoever.
### Confusion about config -> `ModuleConfig`
Also caused by splitting wasm into wasm+wasi is configuration. This
conflates both into the same type `ModuleConfig` as it is simpler than
trying to explain a "will never be finished" api of wasi snapshot-01 in
routine use of WebAssembly. In other words, this further moves WASI out
of the foreground as it has been nothing but burden.
```diff
--- a/README.md
+++ b/README.md
@@ -49,8 +49,8 @@ For example, here's how you can allow WebAssembly modules to read
-wm, err := r.InstantiateModule(wazero.WASISnapshotPreview1())
-defer wm.Close()
+wm, err := wasi.InstantiateSnapshotPreview1(r)
+defer wm.Close()
-sysConfig := wazero.NewSysConfig().WithFS(os.DirFS("/work/home"))
-module, err := wazero.StartWASICommandWithConfig(r, compiled, sysConfig)
+config := wazero.ModuleConfig().WithFS(os.DirFS("/work/home"))
+module, err := r.InstantiateModule(binary, config)
defer module.Close()
...
```
Allows users to do the following to enable sign-extension-ops:
```
r := wazero.NewRuntimeWithConfig(wazero.NewRuntimeConfig().WithFeatureSignExtensionOps(true))
```
Resolves#66
Signed-off-by: Takeshi Yoneda <takeshi@tetrate.io>
Co-authored-by: Adrian Cole <adrian@tetrate.io>
MVP was a term used by WebAssembly insiders when ramping up to the 1.0
spec. While these folks still use that term it is confusing and
unnecessary way to qualify a W3C version. Here are some of the problems:
* MVP does not match a W3C published URL
* MVP does not match a git tag on the spec repo
* MVP was a work in progress, so there are text that say "not in MVP"
which ended up in 1.0 (as MVP became more than it was).
* MVP is jargon to people who don't know that stands for Minimum Viable Product.
This stops this practice and instead uses the W3C 1.0 Draft version
instead: 20191205
Signed-off-by: Adrian Cole <adrian@tetrate.io>
This moves to a new end-user API under the root package `wazero`. This
simplifies call sites while hardening function calls to their known
return value. Most importantly, this moves most logic internal, as
noted in the RATIONALE.md.
Ex.
```go
// Read WebAssembly binary containing an exported "fac" function.
source, _ := os.ReadFile("./tests/engine/testdata/fac.wasm")
// Decode the binary as WebAssembly module.
mod, _ := wazero.DecodeModuleBinary(source)
// Initialize the execution environment called "store" with Interpreter-based engine.
store := wazero.NewStore()
// Instantiate the module, which returns its exported functions
functions, _ := store.Instantiate(mod)
// Get the factorial function
fac, _ := functions.GetFunctionI64Return("fac")
// Discover 7! is 5040
fmt.Println(fac(context.Background(), 7))
```
PS I changed the README to factorial because the wat version of
fibonacci is not consistent with the TinyGo one!
Signed-off-by: Adrian Cole <adrian@tetrate.io>
Co-authored-by: Takaya Saeki <takaya@tetrate.io>
Co-authored-by: Takeshi Yoneda <takeshi@tetrate.io>
